It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. When ‘Green’, they are all thought to be replenishable and natural. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun - often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.
Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic - or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.
As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. Solar Water heating systems are extremely important - and can provide over half of the hot water needs for houses within the UK. The cost of fitting depends on whether you do it yourself (500 to 1500 pounds) or whether you get a professional fitter - in which case it will cost between 2-5k overall.
Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths - as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.
By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter - and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.
Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK - we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further - if energy efficient items such as wind turbines or solar electrical panels are used.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production - as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Then there is Hydropower - something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.
The Hydropower process uses a turbine that can convert the energy from one form into another. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. ‘Micro-Hydro’ utilises a chunk of the outdated sluices and dam systems that have been killed off by the large national distribution methods. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. Between 200 pounds and 3k per KW of energy output, is a good estimate of the overall cost of a project such as this.
It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.
Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry - but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.
(C) S. Edwards 2009. Browse around Green Engineer Certification or Renewable Energy Certification.